Cudy LT400 Kurzanleitung Zur Installation Seite 3

Quick Installation
1. Insert the Standard SIM card into the slot until you hear a click.
SIM card requirement
Nano Sim card
Micro sim card
2. Connect power adapter and turn on the router. Waiting for 2 minutes for
it to start.
3. Check the following LEDs' status.
O O o
Wi-Fi LAN3 LAN2
O
f Internet LED is on , means connected to the internet successful y.
f internet LED is off, p ease follow the instructions of
o
Standard SIM
Nano sim adapter
Standard sim card
Micro sim adapter Standard sim card
O o O O
LANI WAN/LAN INTERNET
Customize The
Customize
. Connect the router
password is printed on the bottom of the router.
2. Launch a web browser and enter htp://cudy.net/
in the address bar, use admin as password to ogin.
3. Below page would pop up if your SIM card needs PIN to unlock. Please
enter your PIN and click Save & App y, then wait 15 seconds to connect
to the Internet.
O
POWER
4G Router.
The 4G Router
via ethernet cable or Wi-Fi.
cudg
4G LTE N300 Wi-Fi
Wi-Fi: Cudy-XXXX
Wi-Fi Password: XXXXXXXX
http://cudy.net/
cudy
c
Auto
Password
Log In
4G Settings
O The SIMis locked,pleaseenter thePINcode, Youhave
3 attemptsatmostfor the PINcode
Save g Apply
-2
EN
Network name and
Router
(or htp://192.168.10.1 /)