Karibu 201B Bedienungsanleitung Seite 45

G.3
The control panel does not work.
Problem
The power indicator
1.
isn't on
The soft keys do not
2.
work
G.4
The light doesn't work.
Problem
The bulb filament is
1.
burned out.
G.5
The heater tube does not heat.
Warning: only qualified person can replace or repair the heater
Problems
Part of the heater does
1
not warm up
The entire room does
2
not heat
Bench heater
3
does not heat
Explanation
The fuse is broken or the sauna
is not plugged in
Unplug sauna, wait a minute or plug back into power source.
Solution
Change the bulb (≦15 watt)
Explanation
The heater is defective
Part of the heater is not connected
well or burned out
The relay is damaged
The control panel is damaged
The plug is not plugged in
correctly
It is not connected tightly into
the outlet on the back panel
- 20 -
Solution
Change the fuse or the plug
in the sauna
Solution
Replace with a new heater
Connect them tightly
Replace the relay
Replace the control panel
Re-plug it
Connected tightly.