DeLOCK 88271 Bedienungsanleitung Seite 3

English
Package content
• USB-C™ docking station
• Cable USB-C™ male to USB-C™ male, length ca. 1 m
• User manual
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
Operation
1. Connect the USB-C™ cable of the docking station to the computer or mobile
device.
Note: A free USB Type-C™ port with DisplayPort alternate mode or with a
Thunderbolt™ 3 / Thunderbolt™ 4 port is required.
2. Connect one or two HDMI monitors to the docking station.
3. When Mac OS is used, the same image is displayed on all ports (mirrored), it
is not possible to use the video ports independently of each other.
4.
Use an Ethernet cable to connect the Gigabit Ethernet port to a network.
5.
Connect a power supply to the USB Type-C™ charging port, to charge your
laptop or mobile device during operation.
6. Connect USB devices to the USB Type-A ports or the USB-C™ port.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 12/2023
-3-