CMP HT0122 Bedienungsanleitung Seite 5

Setting night mode:
Night mode means that the LED lighting automatically goes into low brightness mode (dark mode) during the
night.
In time adjust mode, briefly press the "M" button twice to into night mode adjustment, the default state is
OFF, select ON or OFF by pressing the "+" or "-" buttons. The default time period is from 6pm to 6am and the
device goes into night mode automatically during this time period.
When night mode is activated, press the "M" button and keep it pressed to access the night mode duration
adjustment, the adjustment order is as follows:: START HOUR - START MINUTE - ENDING HOUR - ENDING
MINUTE. When the start hour and minute are adjusted, the upper of the two dots lights up. When the ending
hour and minute are adjusted, the lower of the two dots lights up.
Manual brightness adjustment: the backlighting is brightest by default when powering on, in time display
mode, pressing the "+" button once allows you to change the brightness to medium and low.
Published by Groupe CMP - 157, avenue Charles Floquet – Bât. 4C/4D - 93150 Le Blanc-Mesnil – France
This product is electrical and electronic equipment waste, which is harmful to the
environment and to human health. It must not be disposed of with your
household rubbish. Find out from your local authorities about the availability of
recycling.
Batteries and rechargeable batteries are collected separately.
Complies with requirements stated by the community regulator
For indoor use only
Class III equipment
Direct current (DC)
www.cmp-paris.com - Made in China