Herunterladen Diese Seite drucken

JB Systems MIRROR BALL MB10 Bedienungsanleitung Seite 2

Werbung

ENGLISH
OPERATION MANUAL
Thank you for buying this JB Systems
safety, please read these operating instructions very carefully before you start using this unit.
FEATURES
This product meets the requirements of the current European and national guidelines. Conformity has been
established and the relevant statements and documents have been deposited by the manufacturer.
 This device has been designed to produce decorative effect lighting and is used in light show systems.
 Mirror ball with plastic ball inside.
 Real glass mirrors
 Mirror size: 7x7mm for MB10 and 10x10mm for MB20
BEFORE USE
 Before you start using this unit, please check if there's no transportation damage. Should there be any, do
not use the device and consult your dealer first.
 Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
 Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
Check the contents:
Check that the carton contains the following items:
 Operating instructions
 MB10/MB20
SAFETY INSTRUCTIONS:
This symbol means: indoor use only.
This symbol means: Read instructions.
 To protect the environment, please try to recycle the packing material as much as possible.
 This unit is for indoor use only.
 Don't place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign
object enters the unit, immediately disconnect the mains power.
 Prevent use in dusty environments and clean the unit regularly.
 Keep the unit away from children.
 Inexperienced persons should not operate this device.
 Maximum save ambient temperature is 40°C. Don't use this unit at higher ambient temperatures.
 Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
and servicing.
 The housing and the lenses must be replaced if they are visibly damaged.
 Please use the original packing when the device is to be transported.
 Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
Important: Never look directly into the light source! Don't use the effect in the presence of persons suffering
from epilepsy.
JB SYSTEMS
®
®
product. To take full advantage of all possibilities and for your own
1/12
OPERATION MANUAL
MIRROR BALL 10CM + 20CM

Werbung

loading

Diese Anleitung auch für:

Mirror ball mb20B02027B02022