Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connect Devices to Reolink Home Hub
There are two ways to add Reolink devices to your Home Hub:
1. If your device is already set up, click the "
and choose to "add from device list" or "add from LAN."
2. If your device is not set up yet, click the "
and choose to "scan UID code."
*You can also directly add devices to the Hub while adding devices to the
app.
Reolink Home Hub
Attention: When inserting the SD card into the slot, make sure the side
with the numbers is facing up and push it gently inward until it clicks into
place.
7
English
" button at the top right
+
" button at the top right
+
+
Specifications
Operating Temperature: -10°C~+45°C(14°F to 113°F)
Size: 95*95*161.8mm
Weight: 441g
For more specifications, please visit https://reolink.com/.
Notification of Compliance
FCC Compliance Statements
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
English
8
Werbung
