eichhorn Junior Rider Plus Gebrauchsanleitung Seite 13

Step 3 - Mount the board (1) to the L-mounting (8) using the screws (9), washers and
nuts (10).
There are two ways to mount it:
You can mount the L-mounting facing downwards on the coupling (for strollers with a
low axle) – pictures on the left
OR with the angle facing upwards (for strollers with a high axle) – pictures on the right
Place the assembled board on your stroller/buggy.
Adjust the height of the L-mount (8) so that the two straps can be attached to
the stroller frame and the standing surface of the board is level with the
ground.