Herunterladen Diese Seite drucken

Kruger & Matz FLOW 10 Bedienungsanleitung Seite 16

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

SIM CARD/MEMORY CARD INSTALLATION
• Power off the mobile phone and disconnect it
from charger before unmounting SIM cards.
• Before removing memory card, make sure it has
been disconnected first!
• Exercise caution when operating SIM card/
memory card, as friction or bending may damage
the card.
• Keep the mobile phone and its fittings such as
the SIM cards/memory cards beyond children's
reach.
• If the memory card cannot be read, please check
whether it is has been inserted correctly.
• Producer does not guarantee compability with
every memory card.
• Please note: Dual SIM in standby will shorten the
standby time compared to single SIM.
• Make sure the battery is fully charged if it has
been out of use for a long period.
NOTE: The battery is not detachable. Do not attempt
to disassemble the battery.
CHARGING
Charge the smartphone using the provided USB
cable. Connect the cable to USB-C port on the
device. Other end of the cable plug into provided
charger or compatible USB port.
• Make sure the phone is fully charged before
turning it on for the first time.
• Use only original charging devices approved
by the producer. Using other accessories may
damage the device!
Overheating
While charging, the temperature of the device and
the charger may get increased. This does not affect
the device's lifespan or performance and is in the
device's normal range of operation.
16
Owner's manual

Werbung

loading

Diese Anleitung auch für:

Km05001Km05001-b