Vulpes Goods MAX Anleitung Seite 5

LED Display
The LED display shows the selected setting, heat and
function. Next to the display is the sensor for the remote
control. NOTE: The remote control will only work, if you
point at the display from above.
Control panel
Use the panel for manual control. If the remote control is
not within easy reach, use the buttons to make a
selection.
Ventilation Grid
The ventilation grid gets hot, make sure not to place
anything within 30cm of the ventilation grid.
Handle
Use the handle to easily move. CAUTION: Never move the
stove during operation.
Air inlet
To heat the air, the fan sucks air around the air inlet. Be
sure not to place anything within 30cm of the air inlet.
Power supply
Plug in the power cord and insert the plug into the
outlet. Make sure the voltage is correct for safe use.
5
COPYRIGHT @ ALL RIGHTS RESERVED BY VULPES GOODS®