VEVOR DC15 Bedienungsanleitung Seite 5

OPERATION INSTRUCTION
1. Connect with power. Press the switch the kit will start to work.
Note:The dust will be heaped up much in the fabric filter after some time usage
that will cause the low efficiency of cleaning. Please pull the dust -off rod to
flick dust from filter. If this operation does not work, the dust container? may
be full, please empty it.
2. Open the lock in the bottom to empty the dust. If it is needed to clean fully,
open the two locks in the middle to separate the dust container.
3. There is one metal spare plate for extra usage. This dust reclaimer Kit can be
used in other sandblaster cabinets too. Making the holes with spare plate in the
machine, assemble the rubber sealing ring and kit into the air outlet. Fix the kit
and spare plate with screws. If combine with original cabinet, this spare plate is
no necessary.
4. To prevent accidents, turn off the tool and disconnect its power supply after use.
- 4 -