Werbung
OPERATION INSTRUCTIONS
Instructions For Use
• Before using the appliance for the first time, unpack the appliance,
perform an inspection, and remove the items from the packaging box.
Then, carefully read this ins manual.
• For the first use, do not put coffee powder in the appliance. Plug in the
power cord, add room-temperature water to the water tank up to the
rated capacity, and press the switch. At this point, the water may have a
slight rubbery taste, which is normal.
• When the water inside the appliance is boiled, and the thermostat reaches
a certain temperature, it will switch off, and the appliance will enter
standby mode. When the thermostat temperature drops, it will
automatically reset, entering the keep-warm state. This process helps
heat the coffee pot, thoroughly cleaning any debris that may exist inside
the appliance, to remove impurities left during production, and provide
high-temperature sterilization.
1. Install the glass cup and place
the coffee pot on a stable table.
2. Open the top lid and pour the
appropriate amount of clean
water into the water tank.
5
Werbung
