Herunterladen Diese Seite drucken

PRIXTON RUN FIT CARDIO RF250 Bedienungsanleitung Seite 15

Werbung

3. Lift the Console Panel up, using two Locking Nuts and tighten them on the back of the
Console Panel.
OPERATING THE COMPUTER
Before beginning a workout session ensure that the Safety Key is properly placed onto the
Computer Console and the Safety Clip is securely attached to an article of your clothing.
NOTE: Always stand on the side rails when you start the treadmill, never start the
treadmill while you are standing on the running belt.
QUICK START:
Press the START button on the computer to start exercise, the LCD window will countdown
3 seconds with the LCD showing "3-2-1" before the running belt starts moving. The running
belt starts moving with an initial speed of 1.0 KPH.you may press the SPEED + or SPEED -
button on the computer console or handlebar to increase or decrease the running speed
during exercise.
FUNCTION BUTTONS:
START:
Press the START button to start training on different training mode.
STOP:
Press the STOP button to stop training on different training mode.
PROG (PROGRAM):
Press the PROG button to select the pre-set training program (P01-P12) mode before
training.
MODE:
Press the MODE button to select different functions (time or distance) for setting exercise
goals in manual program mode before training.
SPEED + (SPEED UP):
Press the SPEED + button to make upward adjustments for pre-setting target training time
or distance in manual program mode before training.
SPEED - (SPEED DOWN):
Press the SPEED - button to make backward adjustments for pre-setting target training
time or distance in manual program mode before training.
15

Werbung

loading