Herunterladen Inhalt Inhalt Diese Seite drucken

MasterCool 90063 Serue Gebrauchsanweisung

Tief-vakuum pumpe
Verfügbare Sprachen

Verfügbare Sprachen

In order to make the best
use of your investment,
familiarize yourself with the
new features and operating
instructions before
starting pump. Routine care
and maintenance of your
vacuum pump will give you
years of reliable service.
FEATURES
• An air passage prevents
pump oil from returning
to contaminate vacuum
vessel and pipeline after
the pump stops.
• A built-in device
eliminates oil mist and an
oil-gas separator at the
air exhaust outlet takes
care of oil contamination in the air exhaust.
1 STAGE
Non-slip Cushion Handle.
Thermally Protected
Motor with On/Off
Rocker Switch.
High Volume Fan
Provides Cool
Air to Motor &
Pump.
Large, Light Weight
Reinforced Base for
Cooling Fins to Keep
Stable Positioning.
Temperature Cooler During
Extended Motor Operation.
Instruction Manual
2 STAGE (DUAL VOLTAGE CAPABILITY)
Vapor Discharge/
Oil Fill Port. Easily
Removable. Contains
Internal Check Valve
to Prevent Escape of
Liquid Oil.
Large
Oil Level
Sight
Glass with
Max/Min
Oil Level
Indicator.
Easily Accessible
Oil Drain Valve.
Includes T-Fitting
with 1/4" Flare and
1/2" ACME Ports.
WARNING!
www.mastercool.com
VACUUM PUMPS
Gas Ballast Valve Helps Prevent
Oil Contamination Caused By
High Moisture.
Large, Light Weight
Cooling Fins to Keep Temperature
Reinforced Base for
Cooler During Extended Motor
Stable Positioning.
Operation.
Vapor Discharge/
Oil Fill Port. Easily
Removable. Contains
Internal Check Valve
to Prevent Escape of
Liquid Oil.
Large
Oil Level
Sight
Glass with
Max/Min
Oil Level
Indicator.
Easily Accessible
Oil Drain Valve.
WEAR SAFETY GLASSES
English
Deutsch
Français
Español
Non-slip Cushion Handle.
Thermally Protected Motor
with On/Off Rocker Switch.
• Specially designed for low
temperature and low voltage
conditions to guarantee
normal starting in winter;
≥41˚F (≥5˚C) temperature
and ±10% rated voltage.
• Pump runs with extremely
high ultimate vacuum and low
noise.
EACH VACUUM PUMP HAS BEEN
FACTORY TESTED FOR CFM AND
MICRON PERFORMANCE.
DO NOT ATTEMPT TO
OPERATE WITHOUT
USING OIL!!!
Protected Slide Switch
to Change Operating
Voltage between
115V/50/60HZ &
22OV/50/60HZ
High Volume Fan
Provides Cool Air to
Motor & Pump
Manifold Valve Isolates
Pump from the System
Testing for Leaks.
Includes 3 Inlet Ports,
1/4", 3/8" SAE and 1/2"
ACME.
1
Inhaltsverzeichnis
loading

Inhaltszusammenfassung für MasterCool 90063 Serue

  • Seite 5: Eigenschaften

    FÜR SOFORTIGE Pumpe. GARANTIEGÜLTIGKEIT. NICHT OHNE ÖL BENUTZEN!!! Verstärkte Kühlrippen für das Grundplatte Ölablass-Stopfen kontinuierliches Abkühlen WICHTIG! : Benutzen Sie spezifisches feines Raffinerieöl für Vakuum Pumpen. Benutzung von nicht raffinierten Ölen oder kontaminiertes Öl macht Garantie ungültig! WARNUNG! SCHUTZBRILLE TRAGEN www.mastercool.com...
  • Seite 6: Ölkapazität

    Evakuierungsetappe so rein wie möglich zu halten. Regelmäßig Gasballastventilnadel herausnehmen und O-Ring reinigen oder ersetzen. Oberflächen Verbindungsstücke reinigen, leicht mit Vakuumpumpenöl beschichten, dann wieder alle schließen. 4. ÖLWECHSEL Um das erforderliche Vakuum zu erreichen, braucht die Vakuumpumpe reines, feuchtfreies Öl www.mastercool.com...
  • Seite 7: Einlass Anschluss

    6) Luftausgang freilassen. ACHTUNG: Um die Gefahr für elektrischen Schock zu vermeiden, die Pumpe in einem Raum aufstellen und verhindern dass das Gerät mit Regenwasser in Berührung kommt. GEFAHR: 1) Die Betriebsspannung des Erdsockels beträgt ±10%. Die Befestigung sollte gründlich geerdet www.mastercool.com...
  • Seite 8: Pumpenzurücksendung

    Geräte zu erhalten. BESCHRÄNKTE GARANTIE INFORMATION Vakuumpumpen von Mastercool haben ein Jahr Garantie auf Material und Verarbeitung. Die Garantie erlischt bei Veränderung des Gerätes, unbefügter oder falscher Benutzung oder progressive Abnutzung. Die Garantie gilt ab Verkaufsdatum für den Erstkäufer.

Inhaltsverzeichnis