MOB POWERFLAT8C Bedienungsanleitung Seite 3

Charge the built-in battery
Charge mobile phone with this product according to the following
steps:
•
We provide Type-C cable. Select the correct connector and
connect it with the other end of the USB cable.
•
You can also use the devices original cable to connect the
product with your device directly.
•
If the power bank is charging, the blue indicator lights are
flashing. You also can see the charging indicator from your
mobile phone.
•
During charging, LED will show the current power situation, if
the battery is full, all 4 blue indicators will be lit.
•
Please remove the power source after full charging.
•
Charge time may vary per device.
Battery capacity indicator
To check the charging status of the charger, press the switch button
(2). If all four blue indicators are lit this indicates that the built-in
battery is full; if three blue indicators lit there is 75% of power left. If
two blue indicators are lit there is 50% of the power left, if only one
indicator is lit there is 25% of power left.
Attention
•
This product is not waterproof. Please do not wet it or use it during
heavy rain.
•
If the product accidentally falls into the water, please use a clean
cloth to absorb the water on the product's surface, and do not
switch on the device immediately.
•
Please do not throw the power bank into fire to avoid explosion.
•
Do not use or store the power bank in a hot (over 50 degree
Celsius), wet or corrosive environment.
•
Please keep out of reach of children. Do not use leave product
unattended whilst in use.
• Do not open the device – shock hazard.
•
Check whether the power bank is suitable for your mobile phone
or electronic equipment prior to use
•
If the power bank has not been used for a long time, the power of
the built-in battery can be depleted. To solve this problem, charge