Laser Genetics NS 300 subzero Benutzerhandbuch Seite 10

WARNING
!
CAUTION
!
LASER BEAM. KEEP OUT OF REACH OF CHILDREN.
b) Replacing and Installing NS·300-SZ Battery
Remove the push button assembly (located in the rear end of the laser
designator) by turning it counter clockwise. Place one CR123A battery
inside, with the positive (+) end facing out. Replace the push button
assembly or the momentary pressure switch securely by turning it
clockwise until tight. The NS·300-SZ
is now ready for use.
4) Windage and Elevation Adjustments
The NS·300-SZ is equipped with a fixed mount. The mount has been
centered to zero during the manufacturing process. To adjust the
elevation, first loosen the screws, moving the front and rear to adjust the
angle of the unit.
DANGER
!
WARNING
!
CAUTION
!
DANGER
!
WARNING
!
CAUTION
!
10
LASER LIGHT - AVOID DIRECT EYE EXPOSURE TO THE
DO NOT LOOK DIRECTLY INTO THE LASER BEAM OUTPUT
APERTURE DURING OPERATION. PERMANENT EYE DAMAGE
MAY RESULT.
EXERCISE SAFE GUN HANDLING.
SHOOT ONLY AT AN APPROVED GUN RANGE OR SUITABLE
LOCATION. USE EYE AND EAR PROTECTION AS NECESSARY.