Herunterladen Diese Seite drucken
OSRAM inventronics OPTOTRONIC OTi DALI 25 Bedienungsanleitung

OSRAM inventronics OPTOTRONIC OTi DALI 25 Bedienungsanleitung

Werbung

OPTOTRONIC
1)
OTi DALI 25/220-240/300 D NFC F L
OTi DALI 35/220-240/300 D NFC F L
OTi DALI 75/220-240/300 D NFC F L
A
7)
Input
6)
OTi DALI 25
B16
B10
A
T
H
V
AC
N
V
DC
N
®
Output
OTi DALI 35
28 x
28 x
17 x
17 x
≤ 21 A
≤ 21 A
160 µs
160 µs
198 – 264 V
176 – 276 V
LED Power Supply
8)
OTi DALI 75
23 x
14 x
≤ 28 A
190 µs
2)
3)
picture only for reference, valid print on product 5)
picture only for reference, valid print on product 5)
picture only for reference, valid print on product 5)
9)
Year
4)
10)
Week

Werbung

loading

Inhaltszusammenfassung für OSRAM inventronics OPTOTRONIC OTi DALI 25

  • Seite 1 OPTOTRONIC LED Power Supply ® picture only for reference, valid print on product 5) OTi DALI 25/220-240/300 D NFC F L picture only for reference, valid print on product 5) OTi DALI 35/220-240/300 D NFC F L picture only for reference, valid print on product 5) OTi DALI 75/220-240/300 D NFC F L Input Output...
  • Seite 2 OPTOTRONIC LED Power Supply ®   Installing and operating information (non-isolated driver): Connect only LED load type. LED module will Informação de instalação e funcionamento (controlador não isolado): Ligue apenas a LEDs. O desli- be switched off when output voltage drops below 54V or rises above 240V. Wiring information (see fig. A): gamento do módulo LED ocorre com tensão de saída inferior a 54V ou superior a 240V.
  • Seite 3 OPTOTRONIC LED Power Supply ®   Installasjons- og driftsinformasjon (ikke-isolert drev): Koble kun til LED-lasttyper. LED-modulen blir Beépítési és működtetési információk (nem szigetelt meghajtó): Csak LED jellegű terhelést csatlakoztasson. slått av når utgangsspenningen faller under 54V eller overstiger 240V. Kablingsinformasjon (se fig. A): A LED-modul kikapcsol, ha a kimeneti feszültség 54V alá...
  • Seite 4 WARNING: DALI (FELV) control terminals are not safe to touch. Circuits connected to any DALI (FELV) control terminal shall be insulated for the LV supply  voltage of the control gear, and any terminals connected to the DALI (FELV) circuit shall be protected against accidental contact. INVENTRONICS is a licensee of ams OSRAM. OSRAM is a trademark of ams OSRAM. EN 61347-1 Inventronics GmbH...

Diese Anleitung auch für:

Inventronics optotronic oti dali 35Inventronics optotronic oti dali 75Inventronics optotronic oti dali 35/220-240/400 d nfc f lInventronics optotronic oti dali 75/220-240/500 d nfc f lInventronics optotronic oti dali 25/220-240/300 d nfc f l