Alarm Clock - Silva Homeline Ur 1024 Bedienungsanleitung/Sicherheitshinweise

Used batteries do not belong in household waste . Batteries must

be handed in at a collection point for old batteries.
Time setting:
The time setting can only be made in standby mode (radio off).
Press the "SET" button until the time display flashes.

Press the " " button briefly repeatedly or press and hold until the correct hour is displayed.

Press the " " button briefly repeatedly or press and hold until the correct minutes of the

time are displayed.
Press the Set button to save. The time will now appear on the display.

Set alarm times:
You have the option of setting two independent alarm times.
The alarm time can only be set in standby mode (radio off).
Press and hold the alarm button "AL1" for alarm time 1 or "AL2" for alarm time 2 until the

time display flashes.
Now use the " " and " " buttons to set the hour and " " minutes of the alarm time .

Confirm the alarm time with the corresponding button .

Now set whether you want to be woken up by the alarm tone or the radio.

Switch using the " " or " " button:
bu = Wake up with alarm tone

Frequency display = Wake up with radio (the frequency of the last station tuned appears –

see descriptions below).
Confirm the setting again with the button for the alarm time "AL1" or "AL2".

alarm time appears on the display .

You will be woken up at the set time and the alarm indicator (dot) will flash on the display.

If you want to stop the alarm, press the "AL1" or "AL2" button. The alarm function will

remain active, as shown by the LED display - you will be woken up at the same time the
next day.
Turn alarm function on/off:
If you want to switch on the alarm function, briefly press the "AL1" or "AL2" button until

the LED alarm clock display appears on the screen (dot).
To switch off the alarm function, press the corresponding button again; the dot in the

display disappears.

Alarm clock

17