Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PLACE HEAD
REMOVE HEAD
• Press the locking switch on the handle of the product to release the
head and pull it upwards to remove it.
• The filter should be cleaned periodically to avoid blockages and ensure smooth
air intake.
• Be sure to disconnect the appliance from the mains and allow it to cool before
cleaning the filter.
• The filter screen is attached to the dryer wizard by a magnet. Hold the handle
and pull the filter grid downward to remove it from the product body.
• Do not clean the inner filter with water, it may cause the unit to malfunction. Use
a dry cloth, soft brush or toothbrush to clean the dust.
• After cleaning, put the filter grid back on the handle, you will hear a click which
means the filter grid is well assembled.
CONNECTING ACCESSORIES
• Attach the desired accessory by snap-
Caution: The accessories become very hot dur-
ing use, be especially careful when touching
them to avoid burns.
FILTER MAINTENANCE
ping it into the main unit and turning
clockwise until it is securely attached,
as shown in the image.
E NG L I SH
9
Werbung
