Werbung
;
The installers shall ensure the suitability of base materials into which structural anchor devices are fixed.
;
Where an anchor device is intended to be used exclusively for personal protective equipment, it should be
clearly marked by pictogram, or other clearly seen and understood marking, on or near the anchor device,
clearly stating that the device is designed exclusively for use of personal protective equipment. Anchor devices
are only to be used with ANSI marked fall arrest systems, which will generate forces not to exceed 900 lbs (4
kN) at the anchor device.
;
Due care should be taken to assess the suitability of all transportable temporary anchor devices and any
associated fixings for the application in which it is to be used. The viability of any installation should be verified
by a qualified engineer.
8
Werbung
