Safety; Risks When Handling Heat Exchanger; Safety Instructions And Information - Bencke QWT 100-20 Installationsanleitung

Safety

1 Safety
1.1

Risks when Handling Heat Exchanger

The heat exchanger has been built on the basis of state-of-the-art technology and
the approved safety-technical guidelines. Nevertheless, risks might occur during
use such as
- violation of operator or
- third parties
- impairments in heat exchanger or
- damage to other material values.
All persons, who are engaged in installation, initial operation, operation, maintenan-
ce and repair of the heat exchanger, have to:
- be suited accordingly, mentally and physically.
- be qualified accordingly.
- strictly observe these installation instructions.
The heat exchanger may only be used
- for the intended purpose.
- in a perfect safety-technical state.
In the case of disorders, which might impair safety, a sanitary expert is to be consulted.
It is your safety!
1.2

Safety Instructions and Information

The following symbols are used in this safety instruction:
This symbol means direct danger to the health of persons.
Non-observance of this information might lead to severe injury.
danger
This symbol means possible danger to the health of persons.
Non-observance of this information might lead to severe injury.
caution
This symbol means a possible hazard for the health of persons.
Non-observance of this information might lead to injury to persons or damage to
things.
take care
This symbol gives important information for correct handling of the system.
Non-observance of this information might lead to disorders in the system or the
environment.
18