Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
First time installation
1. SWITCH on THe unIT FoR THe FIRST TIme
Ensure all connections have been made following the diagrams on the previous pages for reference.
To switch on the receiver, press the Power button on the receiver.
Note: Please ensure the mains power switch on the rear of the unit is set to ON position.
1. (Menu Language) Press ◄ ► key to select a language.
2. (Dish Setup) Press OK key to enter Dish Settings*.
* You may use the receiver's default channel list by pressing the Red button in case your dish is already
aligned to the Astra 19.2E satellite with a Universal LNB.
2. InSTaLLaTIon - DISH SeTTIngS
1. Before searching for channels, press the MENU button to enter the Main Menu , select Settings, then
Installation and then set the dish settings.
2. Select the satellite you want to scan:
10
Werbung
Inhaltsverzeichnis
