Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Powering
On
Use Ethernet cable to connect NAS to a LAN port on a router. Connect the power supply to the device,
then short press the power
button to turn it on
ips: After powering on, you can download "UGREEN NAS' then go to "Control Panel" > "Hardware &
Power" to select automatic
startup
o
LAN
AWarning
To avoid potential fires, explosions,
use non-Ugreen
power adapters or uncertified
17
after powering
on.
O
9 ceco
o
or other electrical
hazards, please do NOT
power adapters.
Indicator
LED
Color
White
Flashing (once per 0.5s)
Power
Indicator
Orange
Slow flashing
Orange
Slow flashing
DISK
1-8
Hard
Drive
Indicator
White
Orange
Network
Indicator
White
Buzzer
Status
Power
on
System reset
Drive
error
System error
Status
Description
Static
Power
off
Pulsing
System hibernation
(once per Is)
Device
error
(once per Is)
Drive
error
Flashing
Drive
active
Pulsing
Drive
hibernation
Static
nternet
not
connected
Flashing
Data transfer
(No Internet)
Static
Internet
connected
Flashing
Data transfer
(Internet connected)
Beeper
Short beep once
Short beep once
Beep once at 3-second
intervals
Beep once at 2-second
intervals
Werbung
