Cubic PERFECTPRO Bedienungsanleitung Seite 17

Search tuning FM
1. Press the STANDBY button to turn radio on and select FM band
by pressing the SOURCE button as described.
2. Stand up the FM rubber antenna properly to get best reception.
3. Press the Tuning control knob, and the radio will seek forward
and stop automatically when it finds a radio station with
good signal. The radio will seek forward for the next available
station if pressing down the Tuning control knob again.
FM stereo / mono
1. If the FM station is received with a weak or not optimal signal
some hiss may be audible. To reduce the hiss press and release
the STEREO button so that the Stereo indicator on the display
is cancelled. Your radio will switch to mono mode.
2. To return to stereo mode press and release the STEREO button
so that Stereo indicator on the display is visible. The radio will
switch to stereo mode.
This Stereo / mono switching function is only available in the
FM mode.
GB
16