Ruhhy RG-806 Betriebsanleitung Seite 5

injury and damage to the product and other nearby objects. In addition, the service life of the product may be significantly reduced.
3. Don't make any changes
4. Do not modify the product! Even the smallest changes and modifications may compromise the safety of the product and no longer
ensure safe operation.
5. Carefully open the package by tearing off the adhesive tapes by hand. Do not use sharp, pointy or scratchy objects such as scissors,
knives or letter openers. They may damage the goods. Carefully remove the spare parts from the packaging and remove all
packaging.
6. When putting aside individual parts, be careful not to damage them. Place the parts carefully on a soft surface. Make sure there are
no scratchy, sharp or pointy objects on the floor that could fall on individual parts.
7. Immediately after unpacking and before each use, check the goods for completeness and integrity. If parts are missing or damaged,
do not build the product under any circumstances.
RULES FOR SAFE USE.
1. The tower fan may only be connected to a grounded socket protected by a residual current device (RCD). The measuring
differential current must not exceed 30 mA. If you cannot determine whether the outlet is properly secured, contact an electrician.
Please do not use portable residual current devices (PRCDs).
2. Assemble and use the product with full control over your physical, mental and sensory capabilities, without exception. Do not use
it under the influence of alcohol, drugs or other narcotic or anesthetic substances.
3. Always install the tower fan completely and safely!
4. Before each use, make sure the device is secured and completely assembled. Incomplete assembly endangers the safety of the
product and quickly leads to its damage.
5. Install the tower fan only on flat, non-slip, dry and stable surfaces. This is the only way to be sure that the product works as
intended.
6. Use your tower fan safely and as intended!
7. Connect only one device to the same socket.
8. The power cable must not be bent or crushed.
9. Do not immerse the power cord in water or any other liquid. No water may enter the interior of the device no liquid will come out.
Do not touch the tower fan with wet hands and/or feet.
10. Do not place the device near heat sources such as a radiator, stove, oven or open flame.
11. Cooling performance and functionality cannot be guaranteed. To avoid this, never use the device, with an open window during
rain, a short circuit occurs due to rainwater.
12. Ventilation slots must not be covered or blocked. Make sure there is no hair, fabric, curtains or other textiles caught in the rotor
blades.
13. Do not insert objects or fingers into the ventilation slots.
14. Do not tilt the device more than 45 degrees.
15. Maintain a minimum distance of 30 cm from all objects and walls
16. Do not move the device while using it. Turn it off beforehand.
Never move the device by pulling the power cord. If you want to remove the plug from the socket, first turn off the device and
remove the plug from the socket. Always hold the cable by the connector housing.
17. Do not wrap the cord around the product.
18. Do not drill or pierce holes inside or outside the device.
19. Always turn off the device when you leave the house to avoid noise.
20. Never use a tower fan while sleeping.
21. When moving the product from a cold to a warm room, wait. Please wait a few minutes before using the product. It should warm
to room temperature. Otherwise, condensation may occur and potentially damage the product's electronics.
22. Do not use an extension cord, timer or other device that automatically turns the tower fan or the speed of its impeller blades on
and off! They may overheat and cause a fire!
23. Keep children and pets away from the packaging material, there is a risk of suffocation!
24. Never leave the device unattended when children are nearby!
For safety reasons, children are not allowed to use the tower fan. Children must not play with the device!
25. The tower fan is not a toy and its function must not be changed. It is used only for air circulation in a closed room. Do not use it
outdoors. Improper use may result in fire, electric shock or injury.
INSTALLATION INSTRUCTIONS. (IV)
RULES.
1. Only install a tower fan if you are at your full physical, mental and sensory capacity. Do not install the tower fan under the
influence of alcohol, drugs, strong medications or other intoxicating substances. The tower fan cannot be used if there is a cable or
the device itself is damaged.
2. Please do not expose the device to moisture. The power cable must be routed so that no one can trip over it.
3. Install the tower fan in a place protected from sunlight, moisture, vibration, gases and other vapors.
4. When positioning the device, make sure it is stable on a dry, non-slip surface.
5. Note: Never use the device near water, for example bathtubs, showers, sinks or wet rooms.
6. Never leave the device unattended when in use.
INSTALLATION.
1. Place a clean cloth on a smooth surface. Carefully place the tower fan core and power part on top [1].
2. Put the two halves of the stand together [2]. Before connecting, the power cord must be pulled through the center of the stand.
Attach both parts to the tower fan by unscrewing the four screws [5] using a screwdriver to tighten.
3. Proceed as in step also with the floor panels [3] of the fan tower. Both halves of the base plate [3] must include the cable and be
attached to the stand [2] with four screws [6].
4. Secure the connector [7] with 2 screws [6] over the cable on the underside of the base plate [3].