Ruhhy RG-806 Betriebsanleitung Seite 4

EN
Ladies and Gentlemen, thank you for purchasing our product!
Before starting to use, please read the following instructions
for the correct use of the product. Please keep these instructions on
future and to follow its recommendations, as non-compliance may endanger life or health.
Important: KEEP FOR FUTURE REFERENCE!
-Please read it completely before use and follow all instructions in the manual.
-Do not use the product if any part is missing or damaged.
-Please keep this manual for future reference.
SPECIFICATION:
- Dimensions (height x width): 84x14.5x13cm
- Base diameter: 26cm
- Material: ABS
- Net weight: 2.5 kg
- Power supply: 220-240V ~ 50Hz, 50W
- Hourly timer: 7.5 hours
- Speed levels (3): Normal (NM), Natural (NT), sleep/night mode
- Remote control battery: CR2025
INCLUDED:
- Fan body with power supply - x1
- Stand, halves - x2
- Stand, halves – x2
- Remote control - x1
- Long screw - x4
- Short screw - x6
- Connector – x1
CHARACTERISTIC:
A column fan is a type of fan that, due to its quiet operation and ease of portability, is popular in homes, offices and bedrooms where
air circulation is needed, which can help maintain a comfortable temperature and improve air quality. The column fan has a narrow
and tall structure, resembling a column, which means it takes up little space. The fan has three speed settings and wind type to choose
from: Natural/Sleep/Normal. The fan is characterized by an LED indicator and temperature display. The column fan can be controlled
using a remote control and a button on the top panel.
FAN CONSTRUCTION. (I.)
1. Pilot
2. Control panel
3. LED display
4. Air outlet
5. Stand
PILOT- (II)
DISPLAY- (III)
REMOTE - functions
1. turn on/off
Turn on the device by pressing button "1". Press the button again to turn the fan off again.
2. speed
You can adjust the speed with button 2 in the following order by pressing button 2: Low (I) > Medium (II) > High (III).
"2" is area A shown on the fan display.
3.OSC
Press button "3" to make the fan rotate back and forth.
The corresponding symbol lights up on the display. 2. Pressing the button again ends the function.
4th time
Press the "4" button to set the sleep timer. The time can be set from 0.5 to 7.5 hours.
"4" is area B shown on the fan display.
5th mode
Press the "5" button to select one of the following modes: Normal (NM), Natural (NT) and Sleep/Night (SL).
"5" is area C shown on the fan display.
ATTENTION:
1. Before installation and first use, read the user manual carefully. The instructions are intended to familiarize you with how your
new product works so that you can use it as intended and prevent possible damage.
2. Always follow the instructions below when assembling and using. Failure to follow the instructions may result in serious personal