Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. Cable
connection
Note: If the power cable or signal cable is damaged, you must replace it immediately.
Use a DisplayPort (preferred) or HDMI cable
to connect
your monitor
card output of your computer.
Connect the power adapter to the power
connector of your monitor.
You may connect headphones or speakers
to your monitor.
AUDIO
OUT
Connect
playback
such as headphones
to
the
AUDIO
interface.
OR
7. Display operation
7.1 Indicator light
to the graphics
USB
audio
devices
OUT
Indicator light
DCIN
Please connect the power
adapter
plug
to
the
corresponding power port
Of the
monitor,
and
connect
the other
end
to a
properly grounded power
outlet.
[0
Steady blue light indicates
themonitor
works normally.
Rod blinking
liaht indicatos
energy saving mode until it receives a new signal from
the computer.
If the monitor is fully turned off, the indicator light will
also
be turned
off.
Please make sure your
operates normally, check if all video cables are fully
plugged in and/or connected to the monitor.
that the power
that tho monitor
computer
is turned
is on and
is in itt
on and
Werbung
