Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Dear Customer,Thank you for purchasing one of our many quality products.Please
read this entire manual before using your device for the first time.
1. Installation carbon filter
Carbon filter:
CF110, CF115, CF130, CF135, CF140, CF145, CF150, CF155, CF160, CF170, CF180,
C02, C04, CO6
NOTE
•
Use protective gloves!
•
Disconnect the mains plug before installation!
•
Only use the charcoal filter in recirculation mode!
The carbon filter does not contain any problematic pollutants and can be disposed of in the
residual waste garbage can.
Step 1
Remove the grease filter(s). The carbon filters are attached to both sides of the motor housing.
Step 2
If the mains connection socket is located inside the fireplace cladding, you may have to remove the
fireplace cladding to access the connection socket.
Motor
2. Turn to the left = The carbon filter on it is turned to the left for removal
3. Turn to the right = The carbon filter is placed on the motor and turned or jerked slightly to
the right until it is firmly in place.
Turn to the left
Turn clockwise
7
Carbon filter (built-in)
Holding clamp (holding device on the
motor)
Werbung
