Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Step 3
Place the carbon filter with the retaining device (retaining clips) on the side of the motor and turn
until the filter clicks into place.
Step 4
Reattach the metal/aluminum filters.
Tip: Change the charcoal filters (depending on how the hood is used) every three to six months.
Clean the grease filters regularly to ensure proper operation of the motor)
WARNING! Attach the charcoal filter securely and properly. Otherwise, the charcoal filter may
become loose and cause danger.
NOTE! The extraction capacity is reduced if carbon filters are installed. Carbon filters are not included
in the scope of delivery.
Filter retaining clip
Holding device on the
motor
Order the carbon filters at
www.pkm-online.de
8
Werbung
