Bimar VIM60 Bedienungsanleitung Seite 16

Should the remote control not be used for long periods remove the batteries.
Point the remote control at the fan (max. distance 6 metres, and there should be no
obstructions in between).
The functions and adjustments are as follows:
Stand-by-ON button of the remote control and the Speed/Ok button of the control panel to
-
turn the fan on, press again the button of the remote control or the control panel to turn it off in
standby mode
Ventilation: the three speeds are selected by pressing the Speed button of the remote control
-
or the Speed/ok of the control panel: the symbol corresponding to the selected speed will light
up: (L= min; M= med; H= max).
Mode: the three modes are selected by pressing the "MODE" button:
-
1. Normal: constant ventilation, the symbol will light up "NOR".
2.
Silent: constant and silent ventilation, the symbol will light up (SLP). This mode reduces
ventilation speed from one speed to the lower speed every half hour. The cycles are:
3.
Natural: the symbol will light up (RHY): speeds are random and cyclic (see images with specified
time and speed) during each cycle:
16/28