Reheat Function; Cleaning And Maintenance - Brock Bt 1002 Rd Bedienungsanleitung

BEFORE FIRST USE
1. Make sure that the socket outlet has a suitable ground connection.
2. Before using the device for the first time, run it without any products for a few minutes. Turn
the browning level selector knob to its max. position.
3. Push the lever down until it will be blocked. lt is normal for it to give off a little smoke at the
start.
USING DEVICE
1. Set the desired browning level by the knob.
2. Make sure that thickness of cut rolls and sausages allow to place them into adequate browning
holes.
3. Place the toasts into the holes and push the lever down till locked position (locking is possible
only if the mains cable is connected with socket outlet).
4. When the toasting cycle has finished, the lever returns to its up position and the toasts spring
up at the top of the holes.
WARNING: Products remains hot for a while after toasting cycle is completed.
5. If products are not browned well, adjust the browning level by turning the knob.
WARNING: Pressing STOP button interrupts the toasting cycle and releases the products

REHEAT FUNCTION

Your toater can re-heat toast if it has cooled too quickly.
• Replace the toast in the toaster.
• Set the browning control to a low setting.
• Press the loading handle down.
• Press the REHEAT button, the reheat indicator will light up. ensure toast doesn't burn.
• The loading handle will rise automatically when toast is reheated.
DEFROFT FUNCTION
Your toaster can defrost frozen bread before toasting if required.
• Place the bread into the toaster.
• Set the browning control to required setting.
• Press the loading handle down
• Press the defrost button, the defrost indicator will light up .ensure toast does not burn

CLEANING AND MAINTENANCE

1. Before cleaning the device, make sure that it is unplugged.