IMOU Smart Robot Vacuum Cleaner Serie Bedienungsanleitung Seite 10

3. Charging the device
s Pres and hold theC) button f or3seconds
vacuum cleaner to the dock for charging.The robot vacuum cleaner will enter standby mode after it isful y charged
• Charge the robot vacuum cleaner ful y before cleaning.
• Before cleaning, ensure that cables and items on the
ground are proper y organized, to prevent them from
being tangled, dragged or bumped
cleaning, resulting in damage.
• It is recommended that you enable the robot vacuum
cleaner to start cleaning out of the charging dock. This
can facilitate a rapid recharge of the
cleaner.
tostart therobot vacuum c leaner.
• If there is insufficient power during cleaning, the robot
vacuum cleaner will automatical y return to the charging
dock for charging. t will return to the last-cleaned
into during
position to resume cleaning after charging is completed.
09
Then, press thebutton t orecall therobot
C) Thewhitelightbreathes : Charging
C) The white lightisalways on:Charging finished