Magneti Marelli AC2211 Montageanleitung

Diese Anleitung herunterladen

Power Windows | Leve-glace Electrique | Elektrische Fensterheber | Elevalunas Electricos

Máquina De Vidro Elétrico | Elektrische Raamheffers | Alzacristalli Elettrici

front doors (4d), portes avant (4p), vordere türen (4t), puertas anteriores (4p), portas dianteira (4p), voorportieren (4p),

porte anteriori (4p)

Pour / For

Nissan

Nissan MICRA V (K14)

(12/2016>)

LH 807215FA0A

RH 807205FA0A

LH 807215FA2A

RH 807205FA2A

LH 827215FA6A

RH 827205FA6A

LH 827215FA5A

RH 827205FA5A

left door - portière gauche - linke tür - puerta lado izquierdo - porta esquerda - linkerportier - porta lato sinistro

THIS INSTALLATION INSTRUCTION IS FOR BOTH LEFT AND RIGHT SIDE.

CETTE INSTRUCTION DE MONTAGE EST POUR LES DEUX COTES DROIT ET GAUCHE.

DIESE MONTAGE-ANLEITUNG IST FÜR DIE BEIDE LINKE UND RECHTE SEITE.

ESTA INSTRUCCION DE MONTAJE ES PARA LOS DOS LADOS IZQUIERDO Y DERECHO.

ESTAS INSTRUÇÕES VALEM TANTO PARA O LADO ESQUERDO QUANTO PARA O DIREITO.

DEZE AANWIJZINGEN GELDEN VOOR ZOWEL DE LINKER- ALS DE RECHTERKANT.

Η ΠΑΡΟΥΣΑ ΟΔΗΓΙΑ ΑΦΟΡΑ ΤΟΣΟ ΤΗΝ ΑΡΙΣΤΕΡΗ ΟΣΟ ΚΑΙ ΤΗ ΔΕΞΙΑ ΠΛΕΥΡΑ.

LA PRESENTE ISTRUZIONE VALE SIA PER IL LATO SINISTRO CHE PER IL LATO DESTRO.

AC2211

Seite 1 Power Windows | Leve-glace Electrique | Elektrische Fensterheber | Elevalunas Electricos Máquina De Vidro Elétrico | Elektrische Raamheffers | Alzacristalli Elettrici front doors (4d), portes avant (4p), vordere türen (4t), puertas anteriores (4p), portas dianteira (4p), voorportieren (4p), AC2211 porte anteriori (4p) Pour / For left door - portière gauche - linke tür - puerta lado izquierdo - porta esquerda - linkerportier - porta lato sinistro...
Seite 2 DN763 17/04/2023 ENGLISH ENGLISH THIS INSTALLATION INSTRUCTION IS FOR BOTH LEFT AND RIGHT SIDE. A) Warning: do not operate the window regulator before it is completely assembly on vehicle. Remove door trim and window regulator. B) Remove the original motor from the window regulator to replace and re-mount it on the new window regulator using the screw supplier. C) Insert the electric window regulator into the door and secure it into the holes at positions 1, 2, 3, 4, and 7 using the original screws.