4.1 The operating display
• If "– –" is displayed, the system is in standby mode.
• If "bt" is displayed, the system is in Bluetooth mode.
• If "AU" is displayed, the system is in AUX mode.
• If "US" is displayed, the system is in USB mode.
• If "Hd" is displayed, the system is in ARC mode.
• If "OP" is displayed, the system is in OPT mode.
5 The remote control
The remote control conveys commands to the Soundbar via infrared
light. The remote control must always be directed at the Soundbar.
Other infrared controlled devices or systems (e.g. infrared head-
phones) within its range could be disturbed.
Direct sunlight on the Soundbar may lead to disruptions, because the
Soundbar is unable to recognise the infrared signals of the remote
control. To enable the Soundbar to be controlled by the remote
control, it cannot be switched off with the power switch
No rechargeable batteries may be inserted in the battery compart-
ment of the remote control!
Only two LR03/AM4/AAA 1.5 V micro batteries may be used.
The batteries that are used must not be exposed to excessive
heat such as sunshine, fire or the like!
.