Electrolux JRG 94126 Gebrauchsanweisung Seite 34

34 electrolux
Pull out the plug from the wall socket
or turn the thermostat knob to the «O»
setting.
Leave the door open.
When defrosting is completed, dry
the interior thoroughly and refit the plug.
Turn the thermostat knob back to the
required setting or replace the plug in
the power socket.
Reload the previously removed food
into the compartment.
Never use sharp metal tools to
scrape off frost from the
evaporator as you could damage it.
Do not use a mechanical
device or any artificial means to
speed up the thawing process other
than those recommended by the
manufacturer.
CUSTOSERVICE AND
SPARE PARTS
If the appliance is not functioning
properly, check that:
• the plug is firmly in the wall socket
and the mains power switch is on;
• there is an electricity supply (find out
by plugging in another appliance);
• the thermostat knob is in the correct
position.
• If there are water drops on the
bottom of the cabinet, check that the
defrost water drain opening is not
obstructed (see "Defrosting" section).
• If your appliance is still not working
properly after making the above
checks, contact the nearest service
centre.
To obtain fast service, it is essential
that when you apply for it you specify the
model and serial number of your
appliance which can be found on the
guarantee certificate or on the rating
plate located inside the appliance, on
the bottom left-hand side.