Yolco RL90 Bedienungsanleitung Seite 17

5. Directions for use cont.
Installation requirements
Carefully!
The device has sharp edges. It is recommended to use protective gloves during installation.
The device should not be moved over surfaces susceptible to damage and scratches.
• Fix the device in accordance with the installation instructions to avoid the risk of its instability.
• The electrical socket must be easily accessible so that the device can be quickly disconnected from the power supply in the event of an emergency.
• The electrical socket must be located outside the area corresponding to the back of the device.
• The device should be installed in a recess with dimensions no smaller than those shown below.
Make sure there is enough space for the door to open and close freely.
• The installation site should be strong enough and properly leveled.
• The place should not be exposed to sunlight or other sources of heat.
• When installed in vehicles, the doors of the device should not face the direction of travel.
468
1025
mm
975
mm
485
mm
535
mm
mm
190
mm
290
mm
290
470
mm
330
305
mm
155
mm
260
mm
418
Mounting holes
155
mm
115
mm
mm
165
mm
75
mm
mm
340
mm
100
mm
mm
280
mm