Troubleshooting - Beeverycreative Beethefirst Kurzanleitung

AFTER PRINTING
After your print is over, you have to remove the object from the table. Try to do
it first gently by hand without damaging it. If you are not able to do it, use the
spatula parallel to the table. If none of these techniques work, remove the blue
tape. Don't forget to replace the blue tape before printing again.
To fully disconnect your BEETHEFIRST, you should always unplug it from the
electrical socket.

TROUBLESHOOTING

We recommend you read our FAQ and Troubleshooting pages available on
the website www.beeverycreative.com. If you can't find the solution to a given
problem, please contact our Cusomer Service Team by using the form available
on our website.
19