Beeverycreative BEETHEFIRST Kurzanleitung Seite 18

HOW TO PRINT
1. Make sure you have disabled your computer's hibernation or suspend to disk
function. If the computer goes into hibernation or suspend to disk state while
something is being printed, you will be unable to complete this task and you will
have to start again.
2. Make sure the blue tape is in an acceptable state. If it's damaged, it should be
replaced as described in point 4 of 'Installing BEETHEFIRST'.
3. Make sure that no objects or filament debris are on the printer table.
4. Import the 3D model you wish to print. You can find a range of 3D models online,
or you can create your own 3D model by using modelling software (not included).
5. Make sure you've followed the steps laid out in BEESOFT's printer calibration wizard.
6. Click on the "Gallery Menu" button in BEESOFT and select the file you
imported.
7. Click on the "Print" button and select the desired printing options.
8. BEESOFT will prepare the selected file for printing (a process called "slicing"),
which may take a few minutes. Once it's ready, the printing process will begin.
18