N-Gear RC 600 Bedienungsanleitung Seite 6

Direction for us:
1. Wireless pairing
1.1.When the device is turned on,wireless mode is the default.
1.2.Turn on the wireless device, search for HOPESTAR- Party Box to connect and pair
by bluetooth
2.Suitable for various mobile phone accessories wireless technology, wireless adapter,
wireless player.
3.Voice prompt
There is a voice prompt when turning on/off;
When the volume is upto maximum , there will be a voice prompt; the minimum
volume ,there is no voice prompt.
There will be voice prompt about three times "di-di-di"after detecting the device is low
power, then turn off.
4. Mode switching
4.1 It default wireless mode playing when turn on the speaker
Mode switching:When the TF card ,U-disk ,AUX mode all insert on speaker at the same
time, long press TWS button to switch the playing mode.
Note: The playing sequence will be from wireless mode - TF card mode - U disk mode -
AUX mode .
4.2 The device will select the mode preferentially which you insert last for the TF card, U-
disk ,AUX mode.
5. TWS operation instruction
Open any two speaker at the same time , click either tws button , when you hear the"beep"
to enter the TWS searching; when the TWS connection is successful, when hear the voice
prompt, the host indicator flash and the other one will light up.
6. Play indicator :
White light flashes quickly, about 0.5 seconds/time under bluetooth searching status;
The white light is always on when bluetooth connected successfully with the bluetooth
device ; the white light flashes slowly about 1 second/time under playing status.
7. Charging indicator
The three white lights is flashing orderly from left to right while charging .
When battery is charged 35%, the first lights is always on. The other lights are flashing .
When is charged 70% ,the first and second lights are always on .The rest lights are flashing .
When is full charged,all the lights will be on.
The indicator will display the battery capacity under normal working status.
8.Charging and using:
This machine has a built-in overcharge protection circuit, which can be connected to a
computer or charger for a long time, about four hours Charging is complete.
The play time of each battery will vary depending on the volume used rather different.
9.Volume
The default volume is at 70% when the speaker turn on .
10.If there is without any operation, device will shut down automatically after 15 minutes.