Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5. Installation
To use the data logger, the PC software must be installed from
the CD first. Start "setup.exe" from the CD and install the
program to any folder on the hard disk.
Connect your PeakTech 5180 with the included USB cable to a
Windows PC and Windows will automatically install the driver.
This
will
take
a
few
seconds
to
complete.
Alternatively, you can install the "CP210x" driver from the CD
manually.
Note:
The device can only be used in connection with the Software
and is not shown as an external disk.
-35-
Werbung
