Bolia Display Shelf Serie Montageanleitung
Quicklinks
Verwandte Anleitungen für Bolia Display Shelf Serie
Inhaltszusammenfassung für Bolia Display Shelf Serie
- Seite 1 Product Manual Display Shelf Series Designed by Bolia Design Team Version 002 - April/2024...
- Seite 2 Further information can be found on our website: Bolia.com Technical information As we are constantly developing and improving our products, design and technical changes may occur. This products manual can be downloaded as a PDF file from our website: Bolia.com donnez ou recycler votre produit...
- Seite 3 Warnings GB: IMPORTANT! Mounting screws are not included. Always make sure that the fastening method you choose is suitable and safe for your home. As wall and sealing materials vary, raw plug and screws for fixing to the wall and sealing are not included.
- Seite 4 Warnings GB: Warning. Moisture that penetrates the wood surface can leave marks. Therefore, be careful not to leave even small splashes of liquid on the table top. DK: Advarsel. Fugt som trænger ned i træoverfladen kan efterlade mærker. Vær derfor opmærksom på ikke at efterlade selv små stænk af væske på bordpladen. DE: Warnhinweis.
- Seite 5 Use of the product GB: This product is only for indoor use. DK: Dette produkt er kun til indendørs brug. DE: Dieses Produkt darf nur in Innenräumen verwendet werden. NO: Dette produktet er kun ment for innendørs bruk. SE: Den här produkten är endast avsedd för inomhusbruk. NL: Dit product is uitsluitend bedoeld voor gebruik binnenshuis.
- Seite 6 Tools overview Tools overview drill level pencil screwdriver screw and rawlplugs Fittings and product parts A x 2 / 3 B x 1 NOTE! Screws to fix the furniture to the wall are not included. Choose screws that are specially suited to the material in your wall and have sufficient holding power.
- Seite 7 Assembly steps STEP 01 Tools & Special requirements Use drill Ø8 Use large screws with pan head Use correct rawlplugs level pencil Make sure to place the wall fixture (A) in the right position, see detail. Otherwise the shelf will tilt from the wall.
- Seite 8 Assembly steps STEP 02 Tools & Special requirements drill screw and rawlplugs x2 screwdriver Tighten the screws Tighten the screw STEP 03...
- Seite 9 Measurements & Maximum load 8 kg 17,6 lb 360 mm 150 mm 1135 mm 80 mm 1569 mm 12 kg 26,4 lb 150 mm 750 mm 80 mm 1135 mm 385 mm 2344 mm...