- Make sure the hose is free of obstructions or snags. Entangled or
snarled hoses can cause loss of balance or footing and may become
damaged.
- Use the inflator only for its intended use. Do not alter or modify the
inflator from the original design or function.
- Since the vibration produced by the inflator may cause it to "walk", do
not operate on a high shelf or other surface. Operate at ground or
bench level.
- Never leave the inflator unattended during inflation.
- Do not attempt to pull or carry the inflator by the hoses.
- The compressed air from your inflator is not safe for breathing. Never
inhale air from your inflator or from a breathing device connected to the
inflator.
- Never direct a jet of compressed air toward people or animals. Take
care not to blow dust and dirt towards yourself or others.
- Wear a face or dust mask if the operation is dusty.
- Carefully monitor objects during inflation.
- Turn off and unplug inflator when not in use, when cleaning, or when
changing nozzles.
- inflator can become hot during use. Allow inflator to cool for ten minutes
after each ten minutes of continuous use. Allow inflator to cool 30 minutes
before storing away.
- Do not operate inflator when car engine is running.
SYMBOLS
To reduce the risk of injury, user must read instruction manual.
Warning!
Wear ear protection.
Wear eye protection.
|
1 3
User Manual