General Safety Rules; Work Area; Electrical Safety - Ronix Rh-4263 Bedienungsanleitung

GENERAL SAFETY RULES

WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all
instructions listed below may result in electric shock, fire and/or serious
personal injury.

WORK AREA

1- Keep your work area clean and well lit. cluttered benches and dark
areas invite accidents.
2- Flammable liquids, gases, or dust. Power tools create sparks which
may ignite the dust or fumes. Do not operate power tools in explosive
atmospheres, such as in the presence of flammable liquids, gases, or dust.
3- Keep bystanders, children, and visitors away while operating a power
tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

- Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
- Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
- Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
- Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the
risk of electric shock.
- When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk
of electric shock.
|
10
Analogue Dc Mini Air Compressor