Intenso BUDS PRO Bedienungsanleitung Seite 17

The respective LEDs indicate the charge level of the buds placed inside the charging box. This will
light up red while it is charging; when a bud is fully charged, the LED will change to white for 30
seconds and then go out.
Once the buds are fully charged, the battery will last for approx. 9 hours of music playback (depen-
ding on volume, Bluetooth connection and other factors). The charging box capacity will allow you
to charge the buds approx. 3 times, resulting in a total playback time of approx. 35 hours without a
power source. Please charge the charging box, including the buds, every 3 months when not in use
to prevent deep discharges.
Bluetooth connection
The buds must be paired with the audio playback device the first time they are used. The product's
Bluetooth pairing mode is activated as soon as the buds are removed form the charging box. For more
information on pairing, please refer to the operating instructions for the audio playback device. The
buds will automatically pair with the previously connected device each time they are used. If you
would like to pair the product with a different device, make sure you disconnect from the current
device as the buds can only be paired with one device at a time.
ENC function
The buds are equipped with Environmental Noise Cancellation (ENC). This automatically activated
technology uses additional microphones to detect disturbing background noise and filters it out using
an algorithm before it is transmitted. This is particularly effective for high-frequency noises and im-
proves voice quality during calls.
Active Noise Cancellation (ANC) / transparency mode
This product features Active Noise Cancellation (ANC) and a Transparency Mode. ANC reduces back-
ground noise. The integrated microphones pick up the background noise, processors inside the head-
phones analyse this noise and determine which counter-sound will best neutralise it.
The transparency mode allows background noise to filter through while you are listening to music or
other audio content. Background noise is picked up by the microphones and played back using the
headphones, allowing you to hear loudspeaker announcements even when music is playing.
Please see the "Touch sensor" section to learn how to activate/deactivate ANC or transparency mode.
Music and gaming modes
You can switch between Music Mode and Gaming Mode during playback. The Gaming Mode has
a lower latency than the Music Mode. However, the Music Mode has a more sophisticated sound.
Please see the "Touch sensor" section to learn how to activate/deactivate ANC or transparency mode.
EN - Page 5 of 9