AEG KH 4222 BT Bedienungsanleitung Seite 23

NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect the
devices.
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-sav-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player. Observe the operation
manual of your player.
• If the blue-tooth connection is separated on the device,
both control lights will light up for approx. 3 seconds.
Operation
The device is equipped with multi functional buttons. For
different functions press the respective button briefly or press
and hold.
On/Off (10)
• Press and hold the button approx. 3 seconds to turn the
player on. A beeping sound comes from the headphones
and the blue pilot lamp (2) will blink slowly.
NOTE: Automatic connection
If supported by your player (e.g. mobile phone), the de-
vices will be connected automatically. The prerequisite
for this is:
• The devices were already connected with each
other.
• Bluetooth is activated in your player.
• Press and hold the button again approx. 2 seconds to
turn the player off. The devices are separated. The red
pilot lamp (1) blinks for about approx. 4 seconds and then
goes out.
NOTE:
Turn off the headphones when you are not using them
to conserve the battery.
Pause (3)
• Briefly press the button to pause playback.
• Press the button again to continue playback.
NOTE:
Depending on the device manufacturers, models, and
software versions you need to start the music playback in
your player.
Adjust Volume (5/8)
Press the (5) and (8) buttons to adjust the desired volume
step by step. Press and hold the buttons to continuously
change the volume level.
WARNING:
Listening to music at high volume can damage your hear-
ing.
NOTE:
• If the maximum volume on the headphones has been
reached, a beeping sound will be heard.
• Increase the volume on your player.
Select Music (4/9)
• Press the (4) button to skip to the next track.
• Press the (9) button to skip to the previous track.
Press and hold the buttons to search through the track. The
sound is muted.
NOTE:
Your player must support this function.
Accept/ terminate a conversation
• Push the button (3) to accept an incoming call.
• To end the conversation, push the button one more time.
NOTE:
During an incoming telephone call, the music playback will
stop. After terminating the conversation, the music piece
will continue to be played back. The volume will slowly
climb back up to the value from before the phone call.
Reject the call
To reject the incoming call, push the button
NOTE:
Your mobile phone must support this function.
Calling the last dialed number
Push the button twice (3). The number is called that you
last called with your mobile.
NOTE:
• Your mobile phone must support this function.
• The mobile phone may not be in the music replay set-
ting.
Voice control
Keep the (3) button pushed down for two seconds to ac-
tivate the voice control in your mobile phone. For the further
operation, please consult the manual for your mobile phone.
English
23
(3) twice.