Rollei LUX 100 Bi-Color Anleitung Seite 32

Structure and Possible Combinations
32
Additional Equipment
Connecting the mains adapter
or USB-C cable
– Connect the mains adapter to the DC
connection [14] .
Take care not to leave the mains
adapter hanging in the air . Use the wire
ring to attach the mains adapter to the
lamp tripod .
– Connect a USB-C cable to the USB-C
port [13] on the COB permanent light .
Note: Only use a USB power adapter
with at least 100 W output power .
Connection LUX 99 Wh Battery Grip
(optional)
– Attach the battery grip to the COB
continuous light using the 1/4" con-
nection .
– If you are supplying the light with
power via the LUX 99Wh Battery Grip,
use the D-Tap DC cable to connect the
D-Tap connection of the battery and
the DC connection [14] of the light .
– Do not use the USB-C connection [13]
of the battery for the power supply .
ENGLISH