Pur Line NTW-05 Anleitung Seite 9

EN
INSTALLATION
PARTS:
1. Towel warmer
2. Feet
3. Indicator lamp / Power switch
4. Power plug
5. Screws
The towel warmer must not be installed in close vicinity to water. A distance of
at least 0.6 meters between towel warmer and screened off shower or wash-
basin is required.
If you are not sure, it's recommended to ask a qualified electrician for help.
• WARNING:
Fixed heaters likely to be used in a bathroom are to be installed so that switches
and other controls cannot be touched by a person in the bath or shower.
Assembly:
Place the heater feet with the included screws.
7