REMEZair RMD-305 Bedienungsanleitung Seite 9

ENG
CONTROL PANEL DIAGRAM
Auto Timer LED-backlight
Backlight Defrosting Automatic mode
Operation modes On/Off
Night Mode Intensive
dehumidification
mode
DEVICE USAGE
1. Connect the power supply to the dehumidifier and plug it in.
2. Turn on the device by pressing the button -
3. To turn the device off, press the button
When turned on, the default display will show the current air humidity.
Timer
To set the timer, touch the button . When the timer is set to e.g. 8 hours, the «8H»
indicator will light up. To set the timer for 12 hours, press the button
«12H» will light up and so on (0H-8H-12H-24H-36H-48H).
Defrost function
If frost forms on the surface of the cooling plate, the unit stops dehumidifying. After
defrosting, the unit will automatically continue to dehumidify.
7-LED color illumination
When you turn on the device, the seven-color LED backlight on the bottom of the device
automatically turns on. To fix the desired backlight color, press the button
press the button again, the backlight will turn off completely. The next press will turn
on the backlight again.
Switching operating modes
To select the operating mode of the dehumidifier, touch the button
device runs in Turbo mode and the LED backlight is on.
Operation modes
Turbo mode - the fan runs at maximum speed
Night mode - the fan runs at minimum speed
Auto button
Pressing button A once activates automatic dehumidification mode. Press button A again to
set the desired humidity level in 5% increments. (40%-45%-50%-55%-60%-65%-70%)
Note:
1. In automatic mode, when the humidity reaches the set value, the device will stop
working and restart when the humidity rises.
2. The recommended humidity level is 45% to 55%.
.
again.
again - the indicator
once. If you
. By default, the