Cllinate :
s Ambient temperaturé*']:,0
1 @ass ff.
49'»
0
SN
+10°C to + 32°C
|N
'|+16«C to + 32«C
ST
+16°C to + 38°C
T
1 +16'C to + 43'C
Location
Electrical connection
Before plugging in, ensure that the voltage
and frequency shown on the rating plate
correspond to your domestic power supply.
supply cable plug is provided with a contact
for this purpose. If the domestic power sup-
ply socket is not earthed, connect the appli-
Removing the transport support
To ensure best performance, if the appli-·
ance is positioned below an overhanging
wall unit, the minimum distance between
the top of the cabinet and the wall unit
must be at least 40 mm . Ideally, however,
the appliance should not be positioned be-
The ventilation space can be:
• directly above the appliance
• behind and above the top cupboard.
In this case, the space behind the top
ance to a separate earth in compliance with
current regulations, consulting a qualified
electrician.
if the above safety precautions are not ob-
served.
rectives.
support to secure the door during trans-
portation.
To remove them do these Steps:
• Open the door.
• Remove the transport support from the
door sides.
lower hinge (some models)
silencing pad under the cabinet. Do not re-
move this pad.
59
""//////L - /30 mm/5/
1-L
'E
ir
IA
l.\>
Eil___'
III
-
,/l"il"l"
'1:, , 1 11 ( , , 1 1 1 ,