FALMEC Trevi Gebrauchsanweisung Seite 6

•This manual is an integral part of the product.
•Keep it in good conditions and at hand throughout product's life.
•We recommend reading carefully this manual and all the instructions contained before using and installing the product.
•The installation should be made by qualified staff in compliance with regulations in force.
•As concerns the built-in items, test the system (inlets/ outlets) before completing the external covering.
•The manufacturer is not liable in case of use of the product with purposes other than those provided for.
•Do not leave the residues of the packaging in the home environment.
•Do not hinder the water flow.
•Totally avoid using metallic or abrasive sponges and detergents or abrasive products in order not to damage the surfaces.
•Especially with new installations, in order to prevent impurities or debris penetrating into the tap and cau sing working
problems, purge the system before acti vating the mixer.
•Clean only with water and soap. Carefully rinse and dry with a soft cloth.
•In order to maintain the mixer and its cartridge in the best and long-lasting conditions, we suggest to fit under-top valves
with filter.
CARTRIDGE REPLACEMENT
Remove the plug (1), unscrew the fastening
screw (2) and remove the handle (3). Unscrew
the fastening ring nut (4) and remove the
cartridge (5).
AERATOR FILTER CLEANING
Unscrew the aerator filter (6) and blow
into it to remove any dirt residues. We
recommend cleaning after the first use and
periodically repeating this operation in order to
avoid flow rate reductions.
MAINTENANCE
In addition we recommend cleaning the taps
exclusively with water and soap, avoiding
using abrasive detergents (in powder or liquid),
abrasive sponges or other products containing
alcohol, acids or other aggressive substances.
Falmec s.p.a. will not respond to any damages
caused by failure to observe the above rules.
PACKAGING DISPOSAL
Don't dispose the packaging or parts of it in the environment.
Plastic bags in particular can be source of asphyxia for children.
Please, separate the different packaging materials according to the symbols of the waste sorting, in
order to carry out correctly the recycle and the recovery.
DISPOSAL OF THE EOL COMPONENTS
Don't dispose the article and its components in the environment.
Please observe the instructions, where present, for the correct separation of the materials and their
related separate waste collection.
Particular attention should be paid to the parts identified with the crossed-out waste bin symbol,
which don't have to be disposed with household waste but destined to a waste collection center for
electrical and electonic aplliances (WEEE).
with household waste but destined to a waste collection center for electrical and electronic appliances
(WEEE).
WARNINGS FOR THE USE AND MAINTENANCE
MAINTENANCE
DISPOSALS
6
6
5
4
3
2
2.5mm
1