Sdhc Cards; Audio/Video Playback Of Ipod/Iphone; Bluetooth® Sources - Blaupunkt Bremen 975 Bedienungsanleitung

Removing a USB data carrier
u Turn o the car sound system.
u Disconnect the USB data carrier.

SDHC cards

This device features a SDHC card reader under the cover
at the front of the device.
Inserting a SDHC card
u Open the "MEDIA A/V" cover above the right rotary/
pushbutton.
u Insert the SDHC card with its labelled side to the left
( attened corner to the top) and its contacts rst into
the card reader until it clicks into place.
The device automatically switches to SDHC mode.
The data are read, the playback starts with the rst
media le recognized by the device.
Removing a SDHC card
u If necessary, open the cover .
u Push on the SDHC card until it disengages.
u Pull the SDHC card out of the card reader.

Audio/video playback of iPod/iPhone

You can use the device to control the music and video
playback of numerous iPod and iPhone models.
The device features three USB ports for audio playback
of iPod or iPhone:
•
USB1 port under the cover at the front of the device
•
USB2 and USB3 port at the rear of the device
For video playback, it is also necessary to connect to one
of these A/V ports:
•
A/V In 1 under the cover at the front of the device
• A/V In 2 at the rear of the device
Notes:
• Mobile devices at the USB ports are automatically
loaded.
• A list of compatible iPod and iPhone models is lo-
cated at the end of these instructions. Blaupunkt
cannot guarantee the awless function of other
iPod and iPhone models.
External devices and data carriers
Bluetooth® sources
The Bluetooth® function allows registering cell phones
and media playback devices with the car sound system.
When you register a cell phone with the car sound sys-
tem, you can make phone calls with the built-in hands-
free function. You can access the lists of dialled numbers
and the phone book of the registered cell phone.
If the connected Bluetooth® device supports the func-
tions A2DP and AVRCP, you can play the music via the car
sound system and control the playback.
Connecting a Bluetooth® device for the rst time
Note:
If necessary, switch on Bluetooth® on your external
Bluetooth® device rst and ensure that it is visible.
u In the main menu, select the Settings app (see the
chapter "Main menu").
u Select the Bluetooth option.
Note:
If necessary, switch on Bluetooth® rst.
u Select the Devices management entry.
u Tap on Add device.
Your device is being recognised and appears in the
device list under its Bluetooth® name.
Note:
If your Bluetooth® device does not appear in the de-
vice list, you have to establish the connection from
your Bluetooth® device:
• The device is recognised as "BP 975" by your Blue-
tooth® device.
• When establishing the connection, use the
Bluetooth® PIN of the device. If necessary, rst
de ne the Bluetooth® PIN in the Bluetooth menu
under the Pairing code option.
u Tap on the entry of the device in the device list.
u If necessary, enter the Bluetooth® PIN on your exter-
nal Bluetooth® device.
The external Bluetooth® device is being connected
and is available.
Note:
You can change the Bluetooth® PIN in the Bluetooth
menu under the Pairing code option.
Managing Bluetooth® devices
u In the main menu, select the Settings app (see the
chapter "Main menu").
u Select the Bluetooth option.
Note:
If necessary, switch on Bluetooth® rst.
43